Why Does My JBL Speaker Keep Cutting Out | 10 Possible Reasons In 2022

Why Does My JBL Speaker Keep Cutting Out - Headphonesexpert

Have you ever been listening to your favorite song on your JBL speaker, and then all of the sudden the audio cuts out? You’re not alone. This problem is incredibly common, and there are a few different reasons that make you say why does my JBL speaker keep cutting out?. In this blog post, we’ll explore some of the most common causes of JBL speaker cutting out, and we’ll provide you with some tips on how to fix the issue.

Also Check:-

Issues: Why Does My JBL Speaker Keep Cutting Out?

Issues: Why Does My JBL Speaker Keep Cutting Out - Headphonesexpert

If your JBL speaker keeps cutting out, there are probably a few different things that might be causing the problem. We’ll go through each of these issues in detail below.

1. Bad audio source:

The first problem that you might run into is an issue with the audio source itself. For instance, if you’re playing music from your phone, there could be a bad file or it might not be in the correct format. You can try playing the same audio source on another speaker to see if the problem is with your JBL, or if you need to seek out another source of audio.

2. Damaged audio cable:

Another common issue that might cause your JBL speaker to cut out is damage to the audio cable itself. If there are any visible tears or obvious signs of wear, you might have a faulty cable. Depending upon where the tears are located, this may prevent an electrical connection between your speaker and other devices. If you suspect that this might be causing problems for your speaker, consider replacing the audio cable entirely.

3. Low battery:

If your JBL speaker is struggling to cut out, there’s a good chance that it’s simply low on battery. If you’re not getting enough playtime from each charge, then the device might think that it needs to conserve power. You can usually resolve this problem by charging your JBL for several hours to increase its overall battery life.

The battery levels of the source device can also affect the longevity of the speaker. If you have a low battery on your smartphone or MP3 player, it’s time to charge up.

4. Interference from other wireless devices:

If you are using the Wireless speaker in an area where other wireless devices are in use, the Bluetooth signal may get disrupted. Bluetooth uses the radio frequency to connect to the devices, and this same frequency is shared with other devices that operate on wireless networks. there could be devices that can interface with the wireless speaker

5. Electronic devices:

Some electronic devices like electric motors, CRT TVs, plasma TVs may cause interference to your wireless speakers. There could be a short circuit in the power system due to the unstable electric supply.

6. Heavy Electrical appliances:

Electrical appliances that are large can also cause disturbance to your speaker system especially if they are kept near it. It might not work properly if it is placed near refrigerators, washing machines, or power cables.

7. Microwave oven:

Microwave ovens can interfere with Bluetooth speakers. Microwave ovens use the same type of signal that is shared with wireless devices, so it is possible that it might disrupt the signal if they are near each other.

8. Walls or physical barriers:

If the wireless speaker is placed in a room with large walls or heavy furniture, there might be a disruption in the signal. If it is kept behind closed doors, the signal may not reach properly to your device. Make sure that there are no physical barriers between the speaker and the receiver to ensure proper communication.

9. Low range:

If you are using your wireless speaker in a small cornered room, the range of the signal might be affected. The distance between the source and receiver should not exceed 30 feet or else it could affect the audio quality.

10. Too many Background applications:

Many Background applications started on the source device can cause problems with Bluetooth connections. There are some applications that run in the background silently without giving any notification that they are active. These may not be visible to you until they affect your speaker or headphones. To test this, try closing all the running applications before using the speaker. Because these applications take up the CPU and ram and Bluetooth connectivity might struggle.

How to stop JBL speaker from cutting out:

How to stop JBL speaker from cutting out - Headphonesexpert

Now we know why headphones keep cutting off, we will share how to fix your JBL speaker.

1. Replace the Cable:

If the audio cable is damaged, it may not be able to conduct electricity from one end to another. If there are any visible holes or tears in the exterior cover of the wire, then you should consider replacing it entirely. Cheap and reliable cables can be found in any electronic store or even on Amazon.

2. Reduce the distance between your speaker and the source:

The distance between the wireless speaker and the receiving device should not exceed 30 feet to ensure proper communication. If you are using Bluetooth speakers, they mostly have a limited range of about 10 meters or 30 feet. When either of these devices is moved outside this radius, it may lose connection with its paired device.

3. Physical barrier:

If your device is placed in a closed room or behind a big object, there might be a disruption in the signal. If it’s kept behind closed doors, the signal may not reach properly to your device. Make sure that there are no physical barriers between the speaker and the receiver to ensure proper communication.

4. Reset or paired the speaker again:

If you wish to pair with a different device or if your speaker gets paired with another nearby Bluetooth device and the audio starts cutting out, then it might be that the current connection is not stable. To fix this issue, try disconnecting the device and reconnecting the device.

If you are looking for an upgrade then this might become your next favorite speaker.

JBL CHARGE 5 – Portable Bluetooth Speaker

Why Does My JBL Speaker Keep Cutting Out - JBL CHARGE 5 - Portable Bluetooth Speaker - Headphonesexpert
Colors6
ConnectionBluetooth
Built-in PowerbankYes
Battery 20 hours
Water-resistant ratingIP67 waterproof and dustproof rating

Check Price

This powerhouse of a speaker delivers 20 hours of playtime, making it perfect for all your entertainment needs. And if that’s not enough, the Charge 5 is also IPX7 waterproof, meaning you can take it anywhere without fear of damage. Plus, its built-in power bank lets you charge your devices on the go. This headphone can also be connected to up to 2 devices and features the 5.1 Bluetooth technology which is the latest in the market so you do not disconnect.

https://www.youtube.com/watch?v=Cuigdjrq-xw

Conclusion:

So are the reasons why my JBL speaker keep cutting out? such as interference from other electronic devices, walls or physical barriers, and low range. The best way to troubleshoot this issue is by checking the audio cable, reducing the distance between the speaker and source device, and resetting or pairing the speaker again.

Also Check:-

5/5 - (15 votes)

Leave a Reply