How To Pair Aukey Bluetooth Headphones | A Quick Guide
Do you have a pair of Aukey Bluetooth Headphones that you would like to pair with various devices, like your phone and laptop? Or maybe you’ve come here because your headphones are not pairing to any device, and you don’t know how to pair your Aukey Bluetooth headphones to any device.
Well, whatever the case, we’ve compiled a list of facile and trouble-free instructions that one can easily follow. So scroll down the list below to make your Aukey wireless headphones work well with any device you like.
How To Pair Aukey Bluetooth Headphones
Before doing anything rash and starting to press various buttons on the control panel of your headphones, it’s essential to ensure that your Aukey wireless headphones are turned off. Also, ensure that your headphones aren’t already paired with any other device, like your phone or laptop.
If you know that your headphones are turned off, follow the intuitive instructions below to pair your Aukey Bluetooth headphones.
- Make sure that the battery is fully charged
- Do not place your device and headphones more than 3ft away from each other while pairing
- Press and hold the multifunction button for about 6 seconds or until the LED flashes red and blue
- Turn on Bluetooth pairing on your phone
- Your phone will automatically search for Aukey wireless headphones and show them in the options
- Select your headphone device
- If the LEDs on the headphones flash blue after every 8 seconds, this means that your headphones have paired successfully
Note: If you want to connect the same headphones to another device, turn them off and remove them from the option list of the device they were previously paired with.
How To Reset Aukey Wireless Headphones
If your Aukey headphones don’t appear in the Bluetooth option list of your device, you might want to consider resetting them. Follow the instructions given below to reset your Aukey Bluetooth headphones.
- Press volume up (+), volume down (-) and the multifunction button simultaneously
- Hold for a couple of seconds or until the LED flashes red
- And you’re good to go
Note: Again, remove your headphones from your phone’s Bluetooth device list before resetting the headphones.
What do the Blue and Red lights mean
If you occasionally see those blue and red lights flashing on your Aukey headphones, and don’t know what they mean, scroll down the following list and figure out what each light represents.
LED status | Headphones Status |
LED off | The headphone is turned off. |
LED flashes red 2 times every 8 seconds | The battery is almost drained and must be charged. |
LED solid red | The headphones are plugged into a juice up |
LED solid blue | The battery is completely charged. |
LED flashes red and blue | The headphone is set to Bluetooth pairing mode. |
LED flashes blue 2 times every 5 seconds | The headphone is in standby mode. |
LED flashes blue 2 times every 8 seconds | The headphone is in music playback mode. |
LED flashes blue 1 time every 8 seconds | The pairing was successful. |
LED flashes blue every second | Incoming call. |
What to do when your Aukey device doesn’t pair
Bluetooth devices can get complicated and annoying sometimes. Various reasons can make any Bluetooth device not pair correctly. These reasons may range from poor signals to the great distance between the pairing devices.
Whatever the case, below you’ll find a few problems and their solutions to help you fix the issue in case your device is one that won’t pair.
Make sure that Bluetooth is enabled on your device
Most Bluetooth devices aren’t always ready to connect. Make sure that your device is turned on and in pairing mode. We’ve already discussed how to pair your device above.
Also, make sure that the Bluetooth is turned on on your phone, tablet, laptop, or any other device. This will help you pair your Aukey Headphones easily.
Make sure the devices are in range
We’ve already mentioned this above; your devices should not be more than 2-3 feet apart when in pairing mode. Bluetooth devices require a specific range that helps the device connect reliably. If you’re facing issues with your device’s connectivity, try bringing them closer.
Make sure your devices aren’t already connected
This too, was mentioned before. You must ensure that your phone, tablet, laptop, or other devices are not already connected to other Bluetooth devices.
The same goes for your Aukey headphones; make sure that your headphones aren’t already connected to another device.
Since most Bluetooth devices can only connect to one other source at a time, it’s essential to disconnect it from the current device it is paired with to sync it with another phone.
The Bottom Line:
Pairing Bluetooth devices and headphones can be a pain sometimes. It gets even more annoying when you’re not that into electronics. And those who can’t seem to find their user manual or – even worse – have thrown their user manual out the window thinking they won’t ever have to use it might face some troubles with these things.
And that’s precisely why the internet is here to save the day and help you with your troubles. So we compiled a list of easy-to-follow instructions that might help you save precious time and fix your problems without causing any further complications.
Heⅼlo there, just became aware of your ƅlog through
Google, аnd found that it is really informative.
I am gоing to watch out for brusseⅼs. I’lⅼ appreciate if you
continue this in future. Μany people will be benefited from your
writing. Cһeers!