How To Charge Your Beats Wireless Headphones | A Quick Guide 2022
Stuck with a pair of hi-tech wireless headphones that just won’t charge? Well, you’ve wandered off to the perfect page. We’ve compiled a list of instructions to help you out and make your life a lot easier by guiding you on how to charge your Beats Wireless Headphones without any further delay (or complications).
Scroll through the list of easy instructions and get your stubborn headphones to charge. But if you are looking for headphones that are both wired and wireless then you can read this article.
Possible Reasons: Why Your Headphones Are Not Charging
Before we get into the topic, it is highly essential for you to know why your headphones won’t charge. Below is the list of possible reasons and their solutions to help you know what you’re doing wrong that is causing trouble while charging your headphones.
1. You’re Using The Wrong Adapter:
An adapter or a power source is a device used to connect two different devices. Adapters come in many forms and shapes and have varying power outputs. To learn how much power output an adapter gives, one should check the back of the adapter.
If you connect your headphones’ charger with an adapter that doesn’t give enough power output that your device requires, your headphones may charge very slowly or may not charge at all.
To fix this problem, we suggest that you use an adapter with another power source that matches the power output required by your device.
2. Maybe Your Cable Charging has Defected:
Charging cables are made of very thin, fragile wires that are always in danger of breaking even if you give them a slight twist. Those one or two broken wires might be the reason for all your distress. Why? Well, this breakage might slow down or completely stop the delivery of current from the power source, hence the reason your Beats headphones do not charge.
We recommend that you replace your charging lead with the one that you know works perfectly and see if your headphones charge (just make sure to give your headphones enough time to charge because the battery might be completely drained).
3. Dirty Port:
If you are one of those people who take their headphones anywhere and everywhere they go, you should probably consider cleaning up the charging port of your headphones. With non-stop usage and low maintenance, there is a high possibility of dust and lint being accumulated in the jack of your headset.
You can use an air can or a tiny brush to clean your charging jacking and then put it to charge. This method might sound insignificant to a lot of you out there, but it’s absolutely worth it and works about 7 out of 10 times.
4. Dirty Charging Case:
Most headphones – especially beat wireless headphones – come with a charging case. The built-up dirt in the case of your headphones might result in a poor connection and eventually lead your battery to stop charging.
Even Beats acknowledges this issue that sometimes lint builds up around the connectors, which causes their headphones to stop charging.
You should try to clean your charging case with a paintbrush or a cotton bud. This will help your headphones to connect properly and hopefully start charging.
5. Headphones Not Seated Properly In Their Case:
Again, this problem usually occurs with people who get a charging case with their Beats headphones. The connectors that are responsible for connecting your headphones to the charging case are usually very small. This can result in a loose connection and prevent your device from charging.
We suggest that you properly place your headphones in the case and make sure that they fit perfectly. This is also one of those insignificant problems that people take for granted, but the position of your headphones has a great hand in their charging process.
6. Worn Out Batteries:
Most electronic devices use lithium-ion batteries. These batteries have the capacity to hold a lot of charges and go on for a long period of time. The only issue with these batteries is that they have a limited recharging time.
If you’ve been using your headphones for a long time and have not replaced the batteries yet, we think it’s time for you to consider changing your old batteries to new ones.
7. Broken Port:
If you are comfortable working with electrical devices and know your way around electronics, then you should probably check your socket board for any probable damage or breakage.
A broken socket board or power outlet can result in an inaccurate connection hence the reason for your device to not charge.
So if any other solutions don’t work for you, we recommend that you look out for broken ports and consider replacing them with good ones.
How to Charge Your Beats Wireless Headphones:
Since you’re already aware of the reasons that may stop the headphone from charging, let’s dive right into the process of charging your Beats headphones without any more delay.
1. Use The Included USB Cable:
Use the charging cable that came with your headphones, and connect it to the micro-USB port on the right side of your headphones.
2. Connect The Charging Cable To the Adapter:
Connect the other end of the charging cable to the USB port on the AC adapter that came with your headphones.
You can also plug the charging cable into a free USB port on your laptop. While this method may take longer to charge your headphones it comes in handy when you don’t have access to a charging port.
3. Connect Adapter To A Power Outlet:
Now plug the AC adapter into an electrical outlet and done! Yes, that’s how easy it is to charge your Beats headphones. Make sure to give your headphones about 2 hours to juice up.
The Bottom Line:
It can be a real pain sometimes when your headphones stop charging. And it especially sucks when those headphones come from a widely regarded and bank-breakingly expensive brand like Beats. That’s exactly why, to save your precious time and money, we have compiled a list of reasons that prevent your Beats headphones from charging as well as provide you with intuitive instructions to follow and charge your headphones.
We hope our services were of help to you!
